Quick answer
Work around the two pivoted wooden bars between the dark horizontal shelves. Keep their swinging space clear and connect the lower shelf edge to the creatures underneath before bringing the red ball through.
- Level
- Level 19
- Difficulty
- Normal
- Objective
- Guide the red character to the green creatures in level 19, keeping each separated pocket reachable before the last drop.
Video walkthrough
Video by Go Answer on YouTubeWatch on YouTube
YouTube loads only when you press play. You can also open the video on YouTube.
Step-by-step
Leave room for the wooden plank to change its angle. Remove sand around the moving end without trapping it against an untouched wall.
Round the bottom of the turn instead of leaving a sharp corner. A smooth floor helps the ball follow the bend.
Keep the solid divider in mind when joining the routes. Connect around its end; trying to erase the dark material will not create a passage.
Guide the ball through the remaining creature pockets. Check the edges of the cleared route before assuming that the board is finished.
Watch both ends of the wooden piece. Clearing one end while trapping the other can prevent the change of angle shown in the recording. Check the full target route after the last movement, including pockets above the final drop. If a creature remains, identify the earliest turn that missed it and change that local approach on the next attempt.
Tips
- Watch both ends of the wooden piece. Clearing one end while trapping the other can prevent the change of angle shown in the recording.
- Keep a shallow outer wall around the bend. It gives the red character a surface to follow instead of allowing a free fall past the pocket.
- Trace the fixed wall to its end before committing to a side. Trying to join two pockets straight through dark material leaves a route that cannot connect.
Common mistakes
- Opening the final outlet before checking higher target pockets can leave a creature above the character with no route back. Inspect the side entrances before making that irreversible drop.
- Removing several supports in one swipe makes the release order unpredictable. When a moving piece occupies the route, wait for it to settle before changing nearby sand.
Frequently asked questions
What space does the wooden piece need?
Work around the two pivoted wooden bars between the dark horizontal shelves. Keep their swinging space clear and connect the lower shelf edge to the creatures underneath before bringing the red ball through. A wooden piece may lean into the same entrance the character needs. Compare both ends and the remaining support in the video. Clear a controlled movement area first, then check whether the resulting angle connects to the next pocket.
How do I keep the character in the curved passage?
An abrupt corner can redirect the character away from the next pocket. Keep the bend connected to its receiving floor; when the first attempt misses, adjust the approach angle rather than deepening the entire chamber.
Which part of the fixed divider should I route around?
The dark barrier determines which pockets can connect directly. Find a usable end and prepare the continuation on that side before release. A cut aimed through the middle of the fixed material cannot substitute for that detour.